How to Choose a Fence Contractor: The 15-Minute Vetting Checklist That Prevents a $5,000 Mistake
A new fence is one of those projects where the price tag and the quality gap are both big. Most homeowners spend $2,000 to $8,000 on a fence, and the difference between a good installer and a bad one usually doesn't show up on day one — it shows up two winters later, when posts start leaning because someone set them 18 inches deep with no concrete. Here's how to vet a fence contractor in about 15 minutes of homework, and the warning signs that should end the conversation.
Start With the Paperwork (5 Minutes)
Before you talk price, confirm three things:
- License, where required. Not every state licenses fence contractors, but many states and cities do — check your state's contractor licensing board website. If a license is required and they don't have one, stop here.
- General liability insurance. Ask for a certificate of insurance showing at least $1 million in coverage. A digging mistake that hits a gas or utility line is not a bill you want on your homeowner's policy.
- Workers' comp. If a crew member gets hurt on your property and the contractor isn't covered, you can be exposed. Legitimate companies will email you proof the same day you ask.
Get Three Quotes — and Compare the Right Things
Price-per-foot varies a lot by region and material (roughly $15–$35 per linear foot installed for wood privacy, $25–$45 for vinyl, $25–$55+ for aluminum or steel). But the number itself matters less than what's behind it. A trustworthy written quote spells out:
- Exact linear footage and gate count, measured on-site — not estimated from a satellite photo
- Post specs: depth (24–36 inches minimum in most climates, below the frost line where you have one), spacing (typically 6–8 feet), and whether posts are set in concrete
- Materials by name: pressure-treated pine vs. cedar, picket thickness, gauge of chain link, ring-shank vs. smooth nails
- Who pulls the permit and whether the price includes it (fence permits typically run $40–$150 where required)
- Old fence tear-out and haul-away — a common "surprise" add-on of $300–$1,000
- Warranty terms: at least 1 year on workmanship is standard; better companies offer 3–5 years, separate from manufacturer material warranties
If one quote is 30–40% below the others, it's almost never a bargain. It usually means shallower posts, thinner material, no permit, or a crew that won't be around when something fails.
Five Questions That Separate Pros From Pretenders
- "How deep do you set posts, and in what?" The rule of thumb is one-third of the post's above-ground height buried, minimum 24 inches. A vague answer here is disqualifying — posts are the entire structural job.
- "Will you call 811 before digging?" The correct answer is always yes. It's free, it's the law in most states, and skipping it is how utility lines get cut.
- "How do we confirm the property line?" A good contractor will ask about your survey or plat, not just eyeball it. Fences built a foot onto a neighbor's lot get torn down at your expense.
- "Who actually does the work?" Employees, a regular sub-crew, or whoever's available this week? You want a consistent crew the company stands behind.
- "Can I see a fence you built 3+ years ago?" Any installer can show you last month's job. Aged references show how their work actually holds up.
Red Flags: Walk Away If You See These
- Deposit over 50%. Normal is 10–30%, sometimes up to 50% for custom-ordered material like vinyl or ornamental steel. 100% upfront is how deposit scams work.
- Cash only, no written contract. No paper trail means no warranty, no recourse.
- "We have leftover materials from a job nearby." This door-to-door classic is one of the most common home-improvement scams reported to state attorneys general.
- Pressure to sign today for a "special price." Real pricing doesn't expire in an afternoon.
- No physical address or local track record — just a cell number and a magnetic truck sign.
- They wave off the permit. "You don't need one" might be true — or it might mean a stop-work order and a tear-out later. Verify with your city yourself; it's one phone call.
The Bottom Line
A fence should last 15–20 years for wood and 25+ for vinyl or metal — but only if the posts, hardware, and layout are done right the first time. Spend 15 minutes checking insurance, comparing three itemized quotes, and asking about post depth, and you'll filter out the vast majority of bad outcomes before a single hole is dug.
Keep reading
5 Signs Your Fence Needs Repair or Replacement Now (Before Small Problems Get Expensive)
DIY Fence vs. Hiring a Pro: Real Costs, Time, and What Nobody Tells You
How Much Does a Fence Cost? Your Top 7 Fencing Questions, Answered
Ready to get started?
Call CH Fencing & Decking Services for a free quote in Polk County.
📞 828-817-3036